Gravity Drive™
A miss finishes closer.
Strike milled steel off center and the head twists, bleeding ball speed. You made the right stroke and the putt still comes up short.
Void Gravity Drive
Milled Steel
Three putts struck off center with a Gravity Drive face, three with milled steel. Same robot, same stroke, same green. All three Gravity Drive putts finished inside tap-in range.
Centerfire
Nothing to fight
on the way back.
Balance a normal putter on your finger and it settles into a fixed position — toe down, face up, toe up, whichever way the design leans. That preference is torque, and your hands spend the whole stroke working against it.
Centerfire intersects the shaft with the head’s center of gravity on a machined micro hosel. No balance bias in any direction — as true to zero torque as the geometry allows. Built for a straight-back, straight-through stroke.
That geometry has one cost, and every zero-torque putter pays it. With the shaft through the middle there is nothing resisting the head on a heel or toe strike, so it twists, and the putt comes up short. Gravity Drive is the answer to that — thicker, softer polymer exactly where mishits land, putting speed back into the strike the head would otherwise give away.
Made here
Milled and assembled
in San Diego.
Your head is cut from billet in California, weighted, finished and built to your spec in the same building. Same tolerances whether it is a stock build or a full Pro sheet.
- Machined
- San Diego, CA
- Finished
- San Diego, CA
- Assembled
- San Diego, CA
6061 billet
Milled, not cast
The head is cut from solid aluminum in San Diego. Every one comes off the same program at the same tolerance.
Tungsten
Perimeter weights
Dense metal pushed as far from the center as the head allows. That is what gives it a high MOI — moment of inertia, the head’s resistance to twisting when you miss the middle. The structural half of the answer to twist; Gravity Drive is the other half.
Cerakote
Ceramic finish
An oven-cured ceramic coating, not paint — Cerakote describe their finishes as “thin-film protective ceramic coatings.” It is what lets a color take a season in a bag without wearing through.
Serialized
Every head
Each one is numbered as it is finished, so any putter that comes back to us can be traced to its own build.
Loft and lie are set at build. A heel-shafted hosel is bent to the number you ask for; Centerfire lie is machined into the micro hosel, so it comes in fixed steps.
Pro build sheet
What each choice does.
Stock ships as we spec it. Pro opens all of it — and the shaft is where most players start.
KBS CT Tour
IncludedStepless steel, Constant Taper. Stiffer through the transition.
KBS Tour GPS
+ $100Graphite composite. Minimises deflection bend.
BGT Stability ONE
+ $250One-piece composite. Ultra stiff, very consistent.
BGT Stability Tour
+ $275Carbon fibre and steel. Tour proven.
Grips
Void Pistol — midsize tapered pistol grip. SuperStroke 2.0 / 3.0 — mid-sized or oversized, non-taper (black/white). Jumbomax — mid and jumbo (black/white/black). Anything else, including special color requests for SuperStroke or Jumbomax, select Other Grip and name it in the notes.
Swing style — Armlock and Sweeper
Pick the style and the rest of the sheet defaults to the typical settings that suit it. Adjustable from there to fit you specifically.
Alignment, weight and lie
Five alignment options. Stock or heavy head weight. Lie angle adjustment to suit your setup — choose it here and receive it exactly how you want it, rather than adjusting after it reaches you.
FAQ
Common
questions.
Built and shipped from San Diego, California.
Stock or Pro?
Stock putters ship with stock specs. You choose the colorway, right or left hand, and one of three standard lengths — 33″, 34″ or 35″.
Pro comes with an upgraded shaft as standard and adds full customization: swing style, custom alignment lines, grip options, shaft options, loft and lie adjustment, and Pro-exclusive colorways. Sweeper and armlock builds are Pro only.
What’s the lead time?
Every Void putter is assembled after you order it.
- Stock
- 3–5 business days to build
- Pro
- 7–10 business days to build
- Then ship
- 3–5 business days in the US, 6–10 internationally
These are estimates. Supply, customization and current build volume can move them. If your order is going to run significantly long, your club builder will contact you.
Where can I try one?
We are not available in any physical retail locations, so there is no way to try one in person before ordering.
Every putter comes with a 30-day return period from delivery. Normal use during that period is expected — a minor scuff or scratch will not void the return.
How do I choose a length?
The most accurate way to determine putter length is a professional fitting.
As a quick estimate, height works for most golfers:
- Over 6′
- 35″
- 5′6″ – 6′
- 34″
- Under 5′6″
- 33″
Arm length, setup and stroke style also affect it.
Heel-shafted or Centerfire?
Heel-shafted connects the shaft at the heel of the head, the traditional hosel position. Our hosels are face balanced.
Centerfire is our zero-torque setup. It mounts the shaft through the center of gravity, removing any directional balance. Ideal for a straight-back, straight-through swing.
Can I build a sweeper or armlock?
Yes, on Pro only. Select the swing style on the build sheet and the remaining specs default to our suggested settings for that swing style. You can adjust from there.
Can I customize lie angle, loft and the rest?
Pro clubs are adjustable. The range depends on the hosel:
- Heel-shafted
- Loft and lie fully adjustable. The hosel is bent to your spec.
- Centerfire
- The angles are machined into the micro hosel, so lie is available in 68°, 70°, 72°, 74° or 78° and loft is fixed at 2°.
On Stock clubs the only choices are right or left hand, colorway and length. All other customization is Pro only.
What’s a outlet club?
A putter we cannot sell as new. Some are returns that came back in sellable condition; some did not clear our QC bench. Most are like new or have their defects clearly depicted in the photos.
The issue is cosmetic. The head, the face and the technology are the same, and it plays identically to a new one.
Outlet clubs are final sale — no returns, no exchanges and no customization. A headcover is not included. They are already built, so they ship as soon as they are packed.
